WAC Lighting HR-LED418-N-RO, the 4" LED Non-IC Recessed Lighting Housing is designed for new construction, insulation must be kept 3" from housing. Comes with hangar bars that can be adjusted from 15"-24.5" to conform to different beam structures.
The housing and junction box are made of 20 gauge steel. The frame, hanger bars, and ring are heavy gauge steel as well. The LED recessed lighting housing can have capacity to up to 1" ceiling thickness with 4-3/8" cut-out hole.
Included are six-3W LEDs and is compatible with LEDme 4 inch round Invisible Trims. Trims are sold separately.
- Brand: WAC Lighting
- Model: HR-LED418-N-RO
- Series: 4" LEDme Non-IC, New Construction Housing
- Wattage: 15W
- Voltage: 120VAC
- Lamp Type: Six-3W Warm (3000K) or Neutral LEDs (4500K)
- Driver: Electronic
- Aperture: 4-3/8"
- Height: 5.5"
- Length: 15"-24.5"
- Junction Box: Seven knockouts and four Romex style wire connectors
- Material : Aluminum
- Dimmable : Yes ( w/ electronic low voltage dimmer)
- Knockouts: Seven w/ four Romex style wiring connectors.
- Standards: UL, CUL for damp location and feed through wiring.
- Bulb: Six-3W LEDs.
- TRIM SOLD SEPARATELY - Compatible with HR-LED411TL or HR-LED421TL Trim
- For new construction.
- Non-IC rated (Insulation must be kept at least 3" away from the housing).
- Dimmable with electronic low voltage (ELV) dimmer.
- Avg 50,000 hour rated life.
- Bar hangers can be adjusted from 15"-24.5" to conform to different beam assemblies.
- Housing adjusts up to 1" ceiling thickness.
- UL and CUL listed
Compatible 4" Recessed Lighting Trims: